SAPO-34提升铁钒基催化剂抗碱性能研究

采用浸渍法制备Fe-VO_x/SAPO-34和Fe-VO_x/TiO₂脱硝催化剂,探究SAPO-34分子筛与TiO₂两种载体负载铁钒基氧化物催化活性及抗碱性能的差异。借助X射线衍射(XRD)、X射线光电子能谱(XPS)、氨气程序升温脱附(NH₃-TPD)、氢气程序升温还原(H₂-TPR)、原位红外漫反射(in-situ DRIFTs)等表征手段对催化剂的骨架结构、表面物化性质、氧化还原能力以及对反应气体的吸脱附情况进行分析。结果表明:SAPO-34分子筛内部特定的孔道结构和稳定的骨架,有利于活性组分在载体上均匀分散,降低碱金属对表面活性中心的物理覆盖作用;同时其表面丰富的酸位点能够作为碱金属捕获位,保护催化剂表面的活性中心,保证催化剂的吸附-反应过程能够正常进行,从而使Fe-VO_x/SAPO-34表现出良好的抗碱金属能力。     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

Cu/CuO-Graphene Foam with Laccase-like Activity for Identification of Phenolic Compounds and Detection of Epinephrine

Although great progress has been made in the advancement of nanozymes, most of the studies focus on mimicking peroxidase, oxidase, and catalase, while relatively few studies are used to mimic laccase. However, the use of nanomaterials to mimic laccase activity will have great potential in environmental and industrial catalysis. Herein, Cu/CuO-graphene foam with laccase-like activity was designed for the identification of phenolic compounds and the detection of epinephrine. In a typical experiment, the formation mechanism of Cu/CuO-graphene foam was investigated during the pyrolysis process by thermogravimetric-mass spectrometry. As a laccase mimic, Cu/CuO-graphene foam exhibited excellent catalytic activity with a Michaelis-Menten constant and a maximum initial velocity of 0.17 mmol/L and 0.012 mmol∙L^-1∙s^-1, respectively. Based on this principle, Cu/CuO-graphene foam nanozyme could differentially catalyze phenolic compounds and 4-aminoantipyrine for simultaneous identification of phenolic compounds. Furthermore, a colorimetric sensing platform was fabricated for the quantitative determination of epinephrine, showing linear responses to epinephrine in the range of 3 mg/mL to 20 mg/mL with the detection limit of 0.2 mg/mL. The proposed Cu/CuO-graphene foam nanozyme could be applied for the identification of phenolic compounds and the detection of epinephrine, showing great potential applications for environmental monitoring, biomedical sensing, and food detection fields.     

Linearization of Poisson groupoids

Motivated by a search for Lie group structures on groups of Poisson diffeomorphisms, we investigate linearizability of Poisson structures of Poisson groupoids around the unit section. After extending the Lagrangian neighbourhood theorem to the setting of cosymplectic Lie algebroids, we establish that dual integrations of triangular bialgebroids are always linearizable. Additionally, we show that the (non-dual) integration of a triangular Lie bialgebroid is linearizable whenever the $r$-matrix is of so-called cosymplectic type. The proof relies on the integration of a triangular Lie bialgebroid to a symplectic LA-groupoid, and in the process we define interesting new examples of double Lie algebroids and LA-groupoids. We also show that the product Poisson groupoid can only be linearizable when the Poisson structure on the unit space is regular.     

Freeze–Thaw-Promoted Fabrication of Clean and Hierarchically Structured Noble-Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble-metal aerogels (NMAs) have drawn increasing attention because of their self-supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self-healing properties of noble-metal aggregates, the freezing-promoted salting-out behavior, and the ice-templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble-metal gels within one day without extra additives. In light of their cleanliness, the multi-scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble-metal catalysts.     

A Closed‐Loop Control Strategy for Producing Nitrile Rubber of Uniform Chemical Composition in a Semibatch Reactor: A Simulation Study

To improve the quality of industrial nitrile rubbers, the copolymer chemical composition, p_A(t), should ideally be kept constant along the reaction. This work proposes a closed‐loop control strategy for the semibatch operation of the reactor with the aim of regulating p_A(t) within a reduced range of variability. The proposed strategy is evaluated by simulating a mathematical model of the process. To this effect, a simplified mathematical model of the reaction is first derived and then utilized to obtain a suboptimal control law and a soft‐sensor that estimates the polymerization rates. The suboptimal control law is compensated by adding a term proportional to errors in p_A(t). The simulated example considers the production of the low‐composition AJLT grade, with the copolymerization reaction represented by a detailed mathematical model adjusted to an industrial plant. Due to the high performance of the soft‐sensor, the simulation results suggest that the proposed closed‐loop strategy is efficient to adequately regulate p_A(t) in spite of structural and parametric uncertainties, while other quality variables remained practically unaffected.     

Multi-emissive 1D Cd(II) polymers with a biphenyl bridged bisazamacrocycle for ratiometric discrimination of nitroaromatics and selective visual detection of picric acid

Three one-dimensional ladder-like coordination polymers consisting of Cd₆ metalloring as the building unit, {[Cd₄LCl₄]·3H₂O}_n ( 1 ), {[Cd₃L(ClO₄)(H₂O)]ClO₄·3H₂O}_n ( 2 ), and {[Cd₆(L)₂(NO₃)₂(CH₃OH)(H₂O)](NO₃)₂·2CH₃OH·5H₂O}_n ( 3 ), were solvothermally constructed from a carboxylic functionalized bisazamacrocyclic ligand 4,4′-bis((4,7-bis(2-carboxyethyl)-1,4,7-triazacyclonon-1-yl)methyl)-1,1′-biphenyl (H₄L). These compounds dispersed in ethanol show the multiple emissions originating from the monomeric and intramolecularly overlapping biphenyl moieties which could be sensitively quenched by picric acid (PA) and 4-nitrophenol (4-NP) through the effective fluorescence resonance energy transfer process. The differential fluorescent responses of each compound on exposure to PA and 4-NP individually make the convenient ratiometric discrimination of two analytes based on the fluorescent intensity ratio (I₃₂₀/I₃₆₀) attainable, and 1 and 2 as ratiometric chemosensors for PA present a broad linear detection range from 4 to 300 μM with detection limits of 0.84 and 0.93 μM, respectively. Furthermore, the blue light emission of 1 under an ultraviolet lamp could be selectively quenched by PA even in the presence of all other interfering nitroaromatic pollutants, which empowers the fast visual detection of PA by naked eye.     

Tb3Pd2, Er3Pd2 and Er6Co5–x: structural variations and bonding in rare‐earth‐richer binary intermetallics

The three binary Tb/Er‐rich transition metal compounds Tb₃Pd₂ (triterbium dipalladium), Er₃Pd₂ (trierbium dipalladium) and Er₆Co_5–x (hexaerbium pentacobalt) crystallize in the space groups Pbam (Pearson symbol oP20), P4/mbm (tP10) and P6₃/m (hP22), respectively. Single crystals of Tb₃Pd₂ and Er₆Co_5–x suitable for X‐ray structure analysis were obtained using rare‐earth halides as a flux. Tb₃Pd₂ adopts its own structure type, which can be described as a superstructural derivative of the U₃Si₂ type, which is the type adopted by Er₃Pd₂. Compound Er₆Co_5–x belongs to the Ce₆Co_2–xSi₃ family. All three compounds feature fused tricapped {TR₆} (R = rare‐earth metal and T = transition metal) trigonal prismatic heterometallic clusters. R₃Pd₂ is reported to crystallize in the U₃Si₂ type; however, our more detailed structure analysis reveals that deviations occur with heavier R elements. Similarly, Er₆Co_5–x was assumed to be stoichiometric Er₄Co₃ = Er₆Co_4.5. Our studies reveal that it has a single defective transition‐metal site leading to the composition Er₆Co_4.72(2). LMTO (linear muffin‐tin orbital)‐based electronic structure calculations suggest the strong domination of heteroatomic bonding in all three structures.